Did you know:
Your refrigerator removes heat - it doesn't create cold.
The condenser fan motor helps push that heat out.
If it stops working, the heat stays… and cooling drops.
👉 Here's where you can get a replacement: appliancepartspros.com/parts#AppliancePartsPros#DIYApplianceFix
Can you replace just the washer bearings?
Sometimes yes. Sometimes the bearing is built into a larger assembly, which means the repair can be much bigger than expected.
Check the design before you tear the washer apart. #DIYApplianceFix
Your dishwasher drains but water pools back at the bottom 💧
What are you checking first?
A) Drain pump
B) Door latch
C) Spray arm
Drop your guess. #DIYApplianceFix
Washer not starting or acting strange?
Do not replace the control board just because the machine seems “dead.” A few checks can help confirm if the board is really the problem.
Test before replacing. #DIYApplianceFix
Quick check: does the washer have power, lights, or any error codes?
Those clues can help separate a control board issue from a door lock, lid switch, or power problem.
What’s your worst DIY repair story?
Wrong part?
Took it apart… couldn’t put it back?
Made it worse?
Yeah… it happens.
Drop yours 👇
#AppliancePartsPros#DIYApplianceFix
Freezer is running but everything inside is starting to thaw ❄️
Where would you look first?
A) Condenser fan
B) Ice bucket
C) Door shelf
Pick one. #DIYApplianceFix
That “Phillips” screw might not be Phillips.
If your screwdriver keeps slipping or stripping the screw, stop forcing it. Some appliance screws need a square bit instead.
Using the right bit can save you a bigger headache. #DIYApplianceFix
Quick check: if the screwdriver feels loose or keeps camming out, the screw head may not match the bit you’re using.
That’s when stripping usually starts.