InfoTek Information Science & Technology Co., Inc. is a professional photoelectric industry research and development, consulting Services Company, to provide ou
VirtualLab Fusion uses the Property Browser to relay a complete summary of physical and numerical information about any selected object directly to the user.
With a low-coherence Xenon lamp source, a Michelson interferometer is built up to demonstrate the working principle of optical coherence tomography (OCT).
We built a confocal scanning microscope in VirtualLab Fusion and used a metallic grating as the test object to demonstrate the working principle of the microscope.
A Michelson interferometer with a Xenon lamp source is modeled with the spectral property, i.e. limited coherence length, of the source fully considered.
In lens design, the aberration information in the lens system is important for the optimization process. In VirtualLab Fusion, detectors for different kinds of wave aberration representation are...
We simulate a photonic lattice system with the in-build FMM solver of VirtualLab Fusion. There the wavelength dependend reflectivity, as well as the field in and around the structure for various...
We show you how to create a picture that incorporates the course of an animation.
Lightguide systems based on surface relief gratings for augmented- and mixed-reality (AR/MR) applications are currently one of the hottest topics. To assist the optical engineer in this task,...
We illustrate the usage of the Global Options parameters that relate to visualization and the graphic display of results.
In this document we will take an in-depth look at the visualization options of 2D Data Arrays and go through the corresponding View ribbon options in detail.
Wavefront error is defined as the difference between the reference wavefront phase, which is a constant phase or spherical phase, and the detected wavefront phase of one optical system.
Graphics Add-Ons are a tool inside VirtualLab Fusion that allows the overlay of information, such as regions, onto a Data Array. This use case shows how to add and customize such region overlays.
Graphics Add-Ons are a tool inside VirtualLab Fusion that allows you to overlay information, such as point clouds, a specific region or polarization ellipses onto a detector result. This use case...
This use case shows how to overlay a point cloud (e.g. a dot diagram) onto another result document.
An interferometric setup is built up with SLM, apertures, quarter-wave plates, and grating, in a 4f lens system. Using this setup, we demonstrate the generation of cylindrical vector beams.
In this Use Case we demonstrate the use of the Ellipsometry Analyzer in VirtualLab Fusion on a silicon dioxide (SiO2) coating.
You can use the Parameter Run in VirtualLab Fusion to analyse a system, e.g. tolerancing, by varying the selected parameters.
Point spread function (PSF) and modulation transfer function (MTF) are important optical quantities to evaluate the quality of an imaging system. In VirtualLab Fusion, PSF and MTF for an imaging...
The focal length is an important parameter to evaluate an imaging system. By using the Focal Length Analyzer, the effective and back focal length of optical components can be obtained and used with...