@ZestyTechnology profile picture
Zesty Technology @ZestyTechnology

Creative engineering for creative people

Joined October 2015
  • Tweets 499
  • Following 31
  • Followers 326
84 Photos and videos
We copied all of our things over to @Thangs3D , after the mess with the passwords on Thingiverse. The files will still be there, but know that we are migrating.
5
I published a Thing on @thingiverse! thingiverse.com/thing:494758… #thingalert

Detailed Mock-up files for the Zesty Flex by ZestyTech

The Nimble Flex (V3) extruder can be mounted in many different ways with the drive cable positioned in steps of 22.5 degrees. These models include each of the positions with correct hole positions...

thingiverse.com
I published a Thing on @thingiverse! thingiverse.com/thing:494182… #thingalert

Flex (the Nimble V3) mount for the E3D Toolchanger by ZestyTech

This adapter is designed to mount the Flex (Nimble V3) on a E3D Toolchanger, using a single block and inserts for the Flex mounting screws.Changelog:Initial releaseThe STL models are checked and...

thingiverse.com
I published a Thing on @thingiverse! thingiverse.com/thing:493941… #thingalert

Flex mount for CR-10 type printheads by ZestyTech

This adapter is designed to mount the Flex (Nimble V3) on a CR-10 like print head. It uses the thread of the bowden connector to clamp the mount plate down on the print head.The parts are not really...

thingiverse.com
I published a Thing on @thingiverse! thingiverse.com/thing:492840… #thingalert

Flex (the Nimble V3) mount for the Tevo TLM by ZestyTech

This adapter is designed to mount the Flex on a Tevo Little Monster effector. The mount fits directly on top of the effector and is fastened with 4 M3x10 screws.Changelog:Initial releaseThe STL...

thingiverse.com
I published a Thing on @thingiverse! thingiverse.com/thing:492304… #thingalert

Flex (the Nimble V3) mount for the Smart Effector by ZestyTech

This adapter is designed to mount the Flex on the very smart PCB effector that Escher3D is developing with Think3dPrint3d. It uses a hot end mount that is developed by E3D.Have a look at the effector...

thingiverse.com
1
I published a Thing on @thingiverse! thingiverse.com/thing:489748… #thingalert

Cartesian mount system for the Nimble Flex. by ZestyTech

This system is designed to mount the Nimble V3 (also known as the Flex) on a cartesian type printer. There are 6 mount plates for various printers available. The core unit, the Flex_Mount_Cartesian,...

thingiverse.com
I published a Thing on @thingiverse! thingiverse.com/thing:485174… #thingalert

Nimble Flex mount for the Creality type printheads by ZestyTech

Here is a collection of parts that allow you to use the Nimble Flex on any Creality type print head, as found on a lot of printers, like the CR-10, the Tevo Tornado, and others.There are two main...

thingiverse.com
3
6
It is also to be found on @Thangs3D. It is placed there because it has so many parts, you can easily use the Thangs explode functions to see how the various parts fit together. thangs.com/ZestyTech/Nimble-…

Nimble Flex for Creality - 3D model by Zesty.Tech on Thangs

Here is a collection of parts that allow you to use the Nimble Flex on any Creality type print head, as found on a lot of printers, like the CR-10, the Tevo Tor

thangs.com
3
Because the beta testing for the Nimble V3 Flex is ramping up, there is time to do a little work on the new Kryo V2. It is tiny.
3
9
Testing a lot of different experimental extruders lately. So I designed a mount plate that will allow me to simply change extruders, without removing the hot end or fans. Just use a different mount block for each extruder. The mount block for a V2 Nimble shown. I love #3Dprinting
Mount plate with hot end and part cooling fan installed.

ALT Mount plate with hot end and part cooling fan installed.

Mount plate with hot end and part cooling fan installed.

ALT Mount plate with hot end and part cooling fan installed.

Mount plate with hot end and part cooling fan installed and showing the Nimble V2 extruder mount.

ALT Mount plate with hot end and part cooling fan installed and showing the Nimble V2 extruder mount.

1
5
Zesty Technology retweeted
Naomi Wu 机械妖姬@RealSexyCyborg
10 Jun 2020
Unbelievable, @ytcreators & @TeamYouTube are still insisting a bodysuit and a tank top are "too sexually suggestive". They won't even verify the top tech channel in a country of 1.3b, can we stop pretending this constant nerfing of my work is about anything but bigotry?
87
929
1,954
One of us (Lykle) is posting videos about engineering and 3D Printing. Started off with making props for a movie to be shot in Cyprus. Here he is, #3Dprinting molds for a rubber Glock. youtube.com/watch?v=VVju_GZ-…
1
1
Zesty Technology retweeted
3D Printing World@dddpworld
2 May 2020
I'm preparing the release of the #muldex, but before do I wanted to make sure everyone was aware of the sponsors that helped to make it happen!👋🙌👏 Especially since MRRF didn't take place... Please consider supporting these company's that support the REP-RAP community.
15
17
127
New at Zesty! Nimble Housing V2 Have a look and check it out, zesty.tech/products/nimble-h….

1
1
We are happy to participate in this event. Printing will start shortly and we are already looking forward to seeing the end result. 3dmeetup.se/community-print/ Join in, if you can.

1
1
1
I published a Thing on @thingiverse! thingiverse.com/thing:418320… #thingalert

Nimble V2 mount for Tevo TLM by ZestyTech

This adapter is designed to mount the Nimble V2 on a Tevo Little Monster.With the introduction of Version 2 of the Nimble family, the Nimble V2 and the Sidewinder V2 share the same bolt pattern and...

thingiverse.com
I published a Thing on @thingiverse! thingiverse.com/thing:418110… #thingalert

Nimble V2 mount for the Artemis effector by ZestyTech

This adapter is designed to mount the Nimble V2 on a SeeMeCNC Artemis effector.With the introduction of Version 2 of the Nimble family, the Nimble V2 and the Sidewinder V2 share the same bolt pattern...

thingiverse.com
Load more