Joined September 2011
50 Photos and videos
New blog post. Bypassing disabled 6GHz WiFi frequencies in Dell Precision 5570 / XPS 9530 via a simple ACPI table patch (Linux only) blog.kitor.eu/enable-wifi-6e…
2
95
I made 3d printable model for Nikon F to Canon RF adaptor. That Nikkor 50/1.2 AI-s is pretty fun lens btw :) printables.com/model/1477377…
2
149
Kajetan Krykwiński retweeted
How did the Midsummer release go? What else are we working on? What to expect in the future? Read our first entry in Magic Lantern: What's next? magiclantern.fm/forum/index.…
10
13
55
6,256
DIGIC 8, after stacked (package on a package) RAM was removed. Good luck googling CH4-7000 P/N. No cameras were harmed during chip removal. That SX70 HS was already dead by water submersion. @autoexec_bin
3
3
30
4,861
Digic 8 vs Digic 8. One from SX70, other from 250D. Different P/N but at least UART and JTAG pinout (and in general - ball grid array layout) matches.
1
14
1,896
Kajetan Krykwiński retweeted
So we have JTAG access on Digic 8 models now! This should open new possibilities to understand how hardware and software inner workings :) magiclantern.fm/forum/index.…
3
4
69
3,057
Info : JTAG tap: digic8.cpu_a9 tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd), part: 0xba00, ver: 0x4) Info : digic8.cpu_a9: hardware has 6 breakpoints, 4 watchpoints
11
2,803
Kajetan Krykwiński retweeted
What do we have here? 😃 magiclantern.fm/forum/index.…

10
4
76
6,274
LET'S GO!
It is happening! After over 5 years we are returning with new builds of Magic Lantern. Including 4 new cameras and some exciting plans for the future! Read more in our announcement forum post. magiclantern.fm/forum/index.…
3
126
Time for something not camera related. My favourite stacking toolbox system - Qbrick Pro - had nothing that could fit my plunge saw. So with just a little help of 3d printing I made one out of two existing boxes. #qbrick #DIY printables.com/model/1208155…
1
159
Kajetan Krykwiński retweeted
While we went silent for the most of 2024, we were busy working on "boring", mostly technical stuff. However we have some end-of-the-year news for you, including pretty exciting announcements for 2025 📷 magiclantern.fm/forum/index.…

4
8
68
4,996
This time something different. My journey of unbricking Lenovo ThinkSmart Camera after a failed firmware update. And a small rant on whoever designed firmware update process for those. #Lenovo #ThinkSmart #Unbricking blog.kitor.eu/lenovo-thinksm…
2
2
254
PowerShot SX740 HS recording 14 bit RAW. That's probably as low as it gets. magiclantern.fm/forum/index.… #magiclantern @autoexec_bin
6
4
41
7,137
The result is pretty crappy, as expected... but you know, it works ;)
1
4
507
Ah, and as a reminder - out of the box SX740 doesn't even do .CR3 RAW stills, it is jpeg only point-and-shoot. CR3 functionality is still in firmware, very buggy but can be enabled. magiclantern.fm/forum/index.…

2
486
Got a faster card (Adata 64GB, ~290/260 r/w on UHSII reader). In cam benchmarks peak at ~220MB/s write. 3072x1728px was (almost) sustainable at 25fps. This is probably the limit of what uncompressed 14 bit RAW can do on this cam. @autoexec_bin #eosr #magiclantern
1
4
367
On the other hand, 1080p60 was continuous too :)
1
2
203
📷 I thought there was a bug. But PEBKAC, I just used slow card. This is R recording 1080p30 14bit RAW, continuous :) (with ~100MB/s write card) As always, this is PoC, unstable/unusable - only code available for now. #magiclantern #eosr @autoexec_bin youtube.com/watch?v=BOX8B_id…
2
3
31
5,444
Kajetan Krykwiński retweeted

21
4
75
9,677
👀
2
17
3,956